About our premier Product P250 / 29 WTG :
 
Original Danish design of Wincon West Wind Denmark
 
Awarded the internationally acclaimed and prestigious DNV type Certificate only given to products conforming to stringent IEC norms
 
Also conforming to ISO 9001 : 2000 QMS Standard issued by DNV (Netherlands ).
 
Only machine of 50 metre hub height to be approved by CWET.
 
Aerodynamically designed special type parabolic lattice galvanized steel tower.
 
3 step helical gearbox , splash oil lubricated, with 87 litre oil capacity
 
10 x 12.5 Kvar capacitors unlike conventional provision of 10 x 12.5 KVAR capacitors
 
2 main shaft bearings and 2 Yaw motors as standard fittings.
 
State of the art advanced power electronics designed for Indian Grid conditions and compatibility.




The P 250 / 29 has a 29.6 metre diameter rotor.
 
This is most suited for withstanding stress of heavy winds , as the longer the rotor blade, the more structurally weak it would be, resulting in cracks due to shear and stress.
The rotor blades are the most delicate parts of the machine and also the most exposed and vulnerable part of the turbine.
 
The tower is of galvanized mild steel , ensuring greater resistance to rust and metal fatigue.
Due to the optimum 50 meter hub height there is no danger of the tower breaking up and toppling over in high winds and squalls, as could happen in taller towers.
 
Imported cushioning pads are provided at the base of the generator assembly inside the nacelle  so as to minimize vibration and consequent damage to the driving shaft, gearbox etc.